Airfield Models

Order Fixtures and Accessories for a Magnetic Model Aircraft Building System

April 02, 2024



Home
About
What's New
History
Models Gallery
Model Building Safety
Articles
Mail & FAQ
Site Map
Site Feedback
Contact
Add to Favorites
Search Airfield Models

Back to Magnetic Building System

 

Airfield Models (http://www.airfieldmodels.com/)Small Magnetic Fixture System II Set

News About My Magnetic Fixture System (Pricing and Availability)

$110.00 + Shipping.  Florida residents add 6.5% sales tax.

This set is discounted an additional 5% at checkout.

Set without magnets: $80.00 + Shipping & sales tax if applicable.

This set includes fourteen fixtures in three sizes.  The set builds model aircraft sizes from 1/2A to .40 size.  If you typically build small field models or box-fuselage type sailplanes then this set will get it done for you most economically.

A set like this is also nice if you have a drill press with a cast-iron table.  Before I built a dedicated drill press table I used my fixtures frequently to hold small parts in position because it was a lot faster than trying to find ways to rig up C-clamps to my table which has funky ribbing all over the bottom that my clamps kept slipping off of.

Almost without exception my customers are taken by surprise the first time they put one of my fixtures on a building board and try to remove it.  They really aren't prepared for how much holding power they have.

None of my sets are appropriate for rubber-power stick and tissue models.  Not even this set.  These fixtures are too heavy-duty for those kinds of models.

 

Due to customer requests there is now an option to purchase this set without magnets or magnet-mounting hardware.

Please be aware that these fixtures are designed for one specific magnet and are not guaranteed to work with any other.

Set Contents:

Small Magnetic Fixture System II Set

Quantity

Item

6

1-1/2" Birch Plywood Fixture

4

2-1/2" Birch Plywood Fixture

4

3-1/2" Birch Plywood Fixture

56

Magnet Assembly w/Steel Poles

30

10-24 x 1" Steel Phillips Bolt w/Hex Nut

2

10-24 x 2-1/2" Steel Phillips Bolt

4 10-24 x 1-5/8" Steel Phillips Bolt

4

Hardwood Vertical Press

4

Hardwood Clamp Pad

4

10-24 x 1-5/8" Black Oxide Hex Head Steel Bolt

8

6-32 x 5/8" Black Oxide Steel Socket Cap Bolt

16

#6 Black Oxide Steel Flat Washer

8

6-32 Black Oxide Steel Hex Nut

1

7/64" Hex Key

1 Instructions and Notes

Set contains 22 hand-made wood parts.  Please note that hardwood pieces may be a different species than shown here.  I use only quality hardwoods such as maple, cherry (shown), walnut, etc.  Vertical Presses and Clamp Pads in your set will always be made from the same species of wood.

   
(6) 1-1/2" Fixture. (4) 2-1/2" Fixture. (4) 3-1/2" Fixture. (56) Latch Magnet Assembly. (4) Vertical Press Assembly w/Clamp Pad and hardware.

Magnet mounting hardware.

7/64 Hex Key.

(4) 10-24 x 1-5/8" bolts for Brute Press conversions. (2) 10-24 x 2-1/2" bolts for Monster Press conversions. Current special includes one free sanding block faced with high quality Norton 220 grit sandpaper on one side and 180 grit sandpaper on the other side.

Other Fixture Sets

Small/Medium Fixture Set
Go there
Medium Fixture Set
Go there
New Standard Fixture Set
Go there

Large Fixture Set
Go there

 

 

 

Previous —
Next —

Magnetic Fixture System II Fixture Sets
Small/Medium Magnetic Fixture Set
 
 

Back to Magnetic Fixture System II
Airfield Models Home

 
 

Copyright © 2005-2021 Paul K. Johnson